How to Properly Store Lithium-Ion Batteries

How to Properly Store Lithium-Ion Batteries?

1. Why Proper Storage of Lithium-Ion Batteries Matters?

Preventing Capacity Loss

Batteries naturally self-discharge over time. Storing them incorrectly can accelerate this process, leading to permanent capacity loss.

Avoiding Safety Hazards

Overheating, overcharging, or storing batteries in humid environments can trigger thermal runaway, a chain reaction that may cause fire or explosion.

Ensuring Longevity

Proper storage extends battery lifespan, reducing the need for replacements and lowering long-term costs.

2. Charge Level Before Storage: The 50% Rule

Best practice: Store lithium-ion batteries at 50% charge.

Why 50%?

Prevents deep discharge, which can cause capacity loss.
✅ Reduces stress on the battery’s electrochemical structure.
✅ Minimizes self-discharge rate, maintaining battery health.

What Happens if Stored Incorrectly?

  • At 100% charge → Increased stress on battery cells, accelerating aging.
  • At 0% charge → Risk of over-discharge, leading to irreversible damage.

Recommendation: If storing for more than six months, recharge to 50% every six months.

3. Ideal Temperature Conditions for Storage

Recommended storage temperature: 5°C–20°C (41°F–68°F).

Effects of Temperature Extremes

🚫 Above 25°C (77°F):

  • Accelerates chemical degradation inside the battery.
  • Increases risk of swelling, leakage, or thermal runaway.

🚫 Below 0°C (32°F):

  • Slows down chemical reactions, reducing capacity over time.
  • Can cause internal lithium plating, leading to short circuits when recharged.

Tip: Store batteries in temperature-controlled environments, away from direct sunlight or freezing conditions.

4. Protecting Batteries from Environmental Damage

Moisture and Humidity Control

🚫 Avoid storing in high-humidity environments to prevent:

  • Corrosion of metal contacts.
  • Degradation of the electrolyte inside the battery.

Best Practice:

  • Store in a dry, well-ventilated area.
  • Use silica gel packs to absorb excess moisture.

Keeping Batteries Away from Heat and Sunlight

  • Never store near heaters, hot surfaces, or direct sunlight.
  • Avoid placing them inside a hot car, especially in summer.

5. Safe Storage Containers and Organization

How to Store Individual Batteries?

✅ Use original packaging or plastic battery cases.
✅ Keep terminals covered with non-conductive tape to prevent short circuits.
✅ Store batteries separately to prevent accidental contact.

Fireproof Storage for High-Capacity Batteries

Large battery packs (e.g., EV or industrial batteries) should be stored in:

  • Fireproof battery storage boxes.
  • Metal cabinets with ventilation to reduce heat buildup.

6. Periodic Maintenance for Long-Term Storage

If storing for extended periods (over 6 months):
Recharge the battery to 50% every six months to prevent over-discharge.
✅ Check for physical swelling, leaks, or damage before reuse.

Tip: Use a battery management system (BMS) for monitoring charge levels in large battery packs.

7. Physical Safety Measures to Prevent Damage

🚫 Avoid physical impact: Dropping, puncturing, or crushing a lithium-ion battery can cause internal short circuits, leading to fire or explosion.

🚫 Do not stack heavy objects on batteries: Excess pressure can damage the internal structure.

Store batteries in a shock-resistant environment, such as padded storage cases or dedicated battery compartments.

8. Proper Disposal of Lithium-Ion Batteries

Never dispose of lithium-ion batteries in regular trash.

Why?

Fire hazard – Damaged batteries can ignite.
Toxic chemicals – Improper disposal leads to environmental contamination.

Safe Disposal Methods

✅ Drop off at certified battery recycling centers.
✅ Many retailers (e.g., electronics stores) offer battery recycling programs.

Tip: Check local regulations for battery disposal guidelines.


9. Best Practices for Storing EV and Large Battery Packs

🚗 Electric vehicle (EV) batteries require special storage conditions.

Key Considerations

If storing a vehicle long-term:
✅ Keep battery charge at 50%–60%.
Disable fast-charging to reduce stress on the cells.
✅ Store in a cool, well-ventilated garage.

For spare EV battery packs:
✅ Use temperature-controlled battery storage units.
✅ Ensure regular BMS diagnostics to maintain battery health.

10. Conclusion: Key Takeaways for Safe Lithium-Ion Battery Storage

Store at 50% charge to prevent over-discharge and capacity loss.
Keep in a cool, dry environment (5°C–20°C / 41°F–68°F).
Avoid humidity, heat, and physical damage.
Use fireproof containers for large battery packs.
Recharge every 6 months if stored long-term.
Dispose of old or damaged batteries properly through certified recycling programs.

By following these best practices, you can extend battery lifespan, improve safety, and maintain performance.

FAQs: Frequently Asked Questions

1. What happens if I store a lithium battery at full charge?

Keeping a battery at 100% charge for extended periods accelerates capacity loss and increases internal stress, leading to a shorter lifespan.

2. Can lithium-ion batteries be stored in a refrigerator?

No. Cold temperatures slow chemical reactions, potentially causing lithium plating, which can lead to short circuits.

3. How do I know if a stored battery is still safe to use?

Check for swelling, leaks, corrosion, or unusual smells. If present, dispose of the battery safely.

4. Is it safe to store lithium batteries in a garage?

Only if the garage is temperature-controlled. Avoid storing batteries in extreme heat or cold.

5. What is the best way to prevent a lithium battery fire during storage?

Use fireproof storage boxes, avoid physical damage, and separate batteries to prevent short circuits.

Back to blog

Leave a comment

FAQ's

We use high-quality copper-nickel composites and aluminum to ensure durability and efficient conductivity.

Yes, we offer customization services to fit various battery pack designs and specifications.

Each product undergoes rigorous testing to meet industry standards, ensuring optimal performance and longevity.

You can contact us directly with your specifications, and our team will guide you through the customization process.

Our busbars are compatible with various battery types, including lithium-ion models like 18650, 21700, 26650, and 32700.

We use high-purity materials and precision welding techniques to guarantee consistent power transfer and minimal resistance.

Lead time varies depending on order specifics. Contact our team for an estimated timeframe based on your requirements.

Yes, our team is available to assist with technical questions regarding the integration of our products in battery packs.

We serve a range of industries, including electric vehicles, energy storage, consumer electronics, and renewable energy solutions.

Our products are manufactured with a focus on high standards and undergo extensive testing to ensure safety and long-term performance.

Connect to Thrive, Power Your Drive.

Wellgo is a trusted provider of high-performance battery connection solutions, specializing in custom-designed copper and nickel composite busbars, battery tabs, and precision connectors.

Contact Us for Tailored Battery Connection Solutions